timepiece n : a measuring instrument or device for keeping time [syn: timekeeper]
- Strictly, a timepiece is a timekeeping instrument that lacks a striking mechanism (e.g., a bell, chimes, or gong) to announce the passage of time. One with a striking mechanism is a clock. Although this traditional distinction is overlooked by some, it is commonly noted in dictionaries, glossaries of clock terms, and reference books on clocks, in addition to being widely maintained among knowledgeable collectors, major auction houses, horological museums, and watch manufacturers.
A clock is an instrument for measuring, indicating and maintaining the time. The word clock is derived ultimately (via Dutch, Northern French, and Medieval Latin) from the Celtic words clagan and clocca meaning "bell". For horologists and other specialists the term clock continues to mean exclusively a device with a striking mechanism for announcing intervals of time acoustically, by ringing a bell, a set of chimes, or a gong. A silent instrument lacking such a mechanism has traditionally been known as a timepiece. In general usage today, however, a "clock" refers to any device for measuring and displaying the time which, unlike a watch, is not worn on the person.
HistoryThe clock is one of the oldest human inventions, meeting the need to consistently measure intervals of time shorter than the natural units, the day, the lunar month, and the year. Such measurement requires devices. Devices operating on several different physical processes have been used over the millennia, culminating in the clocks of today.
Sundials and other devicesThe sundial, which measures the time of day by the direction of shadows cast by the sun, was widely used in ancient times. A well-designed sundial can measure local solar time with reasonable accuracy, and sundials continued to be used to monitor the performance of clocks until the modern era. However, its practical limitations - it requires the sun to shine and does not work at all during the night - encouraged the use of other techniques for measuring time.
Candle clocks and sticks of incense that burn down at, approximately, predictable speeds have also been used to estimate the passing of time. In an hourglass, fine sand pours through a tiny hole at a constant rate and indicates a predetermined passage of an arbitrary period of time.
Water clocksWater clocks, also known as clepsydrae(sg: clepsydra), along with the sundials, are possibly the oldest time-measuring instruments, with the only exceptions being the vertical gnomon and the day-counting tally stick. Given their great antiquity, where and when they first existed are not known and perhaps unknowable. The bowl-shaped outflow is the simplest form of a water clock and is known to have existed in Babylon and in Egypt around the 16th century BC. Other regions of the world, including India and China, also have early evidence of water clocks, but the earliest dates are less certain. Some authors, however, write about water clocks appearing as early as 4000 BC in these regions of the world.
The Greek and Roman civilizations are credited for initially advancing water clock design to include complex gearing, which was connected to fanciful automata and also resulted in improved accuracy. These advances were passed on through Byzantium and Islamic times, eventually making their way to Europe. Independently, the Chinese developed their own advanced water clocks, passing their ideas on to Korea and Japan.
Some water clock designs were developed independently and some knowledge was transferred through the spread of trade. It is important to point out that the need for the common person to 'know what time it is' largely did not exist until the Industrial Revolution, when it became important to keep track of hours worked. In the earliest of times, however, the purpose for using a water clock was for astronomical and astrological reasons. These early water clocks were calibrated with a sundial. Through the centuries, water clocks were used for timing lawyer's speeches during a trial, labors of prostitutes, night watches of guards, sermons and Masses in church, to name only a few. While never reaching the level of accuracy based on today's standards of timekeeping, the water clock was the most accurate and commonly used timekeeping device for millennia, until it was replaced by the more accurate pendulum clock in 17th century Europe.
Early clocksIn 797 (or possibly 801), the Abbasid caliph of Baghdad, Harun al-Rashid, presented Janae with an Asian Elephant named Abul-Abbas together with a "particularly elaborate example" of a water clock.
None of the first clocks survived from 13th century Europe, but various mentions in church records reveal some of the early history of the clock.
Medieval religious institutions required clocks to measure and indicate the passing of time because, for many centuries, daily prayer and work schedules had to be strictly regulated. This was done by various types of time-telling and recording devices, such as water clocks, sundials and marked candles, probably used in combination. Important times and durations were broadcast by bells, rung either by hand or by some mechanical device such as a falling weight or rotating beater.
The word horologia (from the Greek ὡρα, hour, and λεγειν, to tell) was used to describe all these devices, but the use of this word (still used in several romance languages) for all timekeepers conceals from us the true nature of the mechanisms. For example, there is a record that in 1176 Sens Cathedral installed a ‘horologe’ but the mechanism used is unknown. According to Jocelin of Brakelond, in 1198 during a fire at the abbey of St Edmundsbury (now Bury St Edmunds), the monks 'ran to the clock' to fetch water, indicating that their water clock had a reservoir large enough to help extinguish the occasional fire .
These early clocks may not have used hands or dials, but “told” the time with audible signals.
A new mechanismThe word clock (from the Latin word clocca, "bell"), which gradually supersedes "horologe", suggests that it was the sound of bells which also characterized the prototype mechanical clocks that appeared during the 13th century in Europe.
Between 1280 and 1320, there is an increase in the number of references to clocks and horologes in church records, and this probably indicates that a new type of clock mechanism had been devised. Existing clock mechanisms that used water power were being adapted to take their driving power from falling weights. This power was controlled by some form of oscillating mechanism, probably derived from existing bell-ringing or alarm devices. This controlled release of power - the escapement - marks the beginning of the true mechanical clock. Outside of Europe, the escapement mechanism had been known and used in medieval China, as the Song Dynasty horologist and engineer Su Song (1020 - 1101) incorporated it into his astronomical clock-tower of Kaifeng in 1088. However, his astronomical clock and rotating armillary sphere still relied on the use of flowing water (ie. hydraulics), while European clockworks of the following centuries shed this old habit for a more efficient driving power of weights, in addition to the escapement mechanism.
Besides the Chinese astronomical clock of Su Song in 1088 mentioned above, in Europe there were the clocks constructed by Richard of Wallingford in St Albans by 1336, and by Giovanni de Dondi in Padua from 1348 to 1364. They no longer exist, but detailed descriptions of their design and construction survive, while modern reproductions have been made. They illustrate how quickly the theory of the mechanical clock had been translated into practical constructions, and also that one of the many impulses to their development had been the desire of astronomers to investigate celestial phenomena.
Wallingford's clock had a large astrolabe-type dial, showing the sun, the moon's age, phase, and node, a star map, and possibly the planets. In addition, it had a wheel of fortune and an indicator of the state of the tide at London Bridge. Bells rang every hour, the number of strokes indicating the time.
Dondi's clock was a seven-sided construction, 1 metre high, with dials showing the time of day, including minutes, the motions of all the known planets, an automatic calendar of fixed and movable feasts, and an eclipse prediction hand rotating once every 18 years.
It is not known how accurate or reliable these clocks would have been. They were probably adjusted manually every day to compensate for errors caused by wear and imprecise manufacture.
The Salisbury Cathedral clock, built in 1386, is considered to be the world's oldest surviving mechanical clock that strikes the hours.
Later developmentsClockmakers developed their art in various ways. Building smaller clocks was a technical challenge, as was improving accuracy and reliability. Clocks could be impressive showpieces to demonstrate skilled craftsmanship, or less expensive, mass-produced items for domestic use. The escapement in particular was an important factor affecting the clock's accuracy, so many different mechanisms were tried.
Spring-driven clocks were developed during the 17th century, and this gave the clockmakers many new problems to solve, such as how to compensate for the changing power supplied as the spring unwound.
The first record of a minute hand on a clock is 1475, in the Almanus Manuscript of Brother Paul .
During the 15th and 16th centuries, clockmaking flourished, particularly in the metalworking towns of Nuremberg and Augsburg, and in France, Blois. Some of the more basic table clocks have only one time-keeping hand, with the dial between the hour markers being divided into four equal parts making the clocks readable to the nearest 15 minutes. Other clocks were exhibitions of craftsmanship and skill, incorporating astronomical indicators and musical movements. The cross-beat escapement was developed in 1585 by Jost Burgi, who also developed the remontoire. Burgi's accurate clocks helped Tycho Brahe to observe astronomical events with much greater precision than before.
The first record of a second hand on a clock is about 1560, on a clock now in the Fremersdorf collection. However, this clock could not have been accurate, and the second hand was probably for indicating that the clock was working. The next development in accuracy occurred after 1657 with the invention of the pendulum clock. Galileo had the idea to use a swinging bob to regulate the motion of a time telling device earlier in the 17th century. Christiaan Huygens, however, is usually credited as the inventor. He determined the mathematical formula that related pendulum length to time (99.38 cm or 39.13 inches for the one second movement) and had the first pendulum-driven clock made. In 1670, the English clockmaker William Clement created the anchor escapement, an improvement over Huygens' crown escapement . Within just one generation, minute hands and then second hands were added.
A major stimulus to improving the accuracy and reliability of clocks was the importance of precise time-keeping for navigation. The position of a ship at sea could be determined with reasonable accuracy if a navigator could refer to a clock that lost or gained less than about 10 seconds per day. This clock could not contain a pendulum, which would be virtually useless on a rocking ship. Many European governments offered a large prize for anyone that could determine longitude accurately; for example, Great Britain offered 20,000 pounds, equivalent to millions of dollars today. The reward was eventually claimed in 1761 by John Harrison, who dedicated his life to improving the accuracy of his clocks. His H5 clock is reported to have lost less than 5 seconds over 10 days.
The excitement over the pendulum clock had attracted the attention of designers resulting in a proliferation of clock forms. Notably, the longcase clock (also known as the grandfather clock) was created to house the pendulum and works. The English clockmaker William Clement is also credited with developing this form in 1670 or 1671. It was also at this time that clock cases began to be made of wood and clock faces to utilize enamel as well as hand-painted ceramics. On November 17, 1797, Eli Terry received his first patent for a clock. Terry is known as the founder of the American clock-making industry.
Alexander Bain, Scottish clockmaker, patented the electric clock in 1840. The electric clock's mainspring is wound either with an electric motor or with an electro-magnet and armature. In 1841, he first patented the electromagnetic pendulum.
The development of electronics in the twentieth century led to clocks with no clockwork parts at all. Time in these cases is measured in several ways, such as by the vibration of a tuning fork, the behaviour of quartz crystals, the decay of radioactive elements, or resonance of polycarbonates. Even mechanical clocks have since come to be largely powered by batteries, removing the need for winding.
How clocks work
The invention of the mechanical clock in the 13th century started a change in timekeeping methods from continuous processes, such as the motion of the gnomon's shadow on a sundial or the flow of liquid in a water clock, to repetitive oscillatory processes, like the swing of a pendulum or the vibration of a quartz crystal, which were more accurate. All modern clocks use oscillation.
Although the methods they use vary, all oscillating clocks, mechanical and digital and atomic, work similarly and can be divided into analogous parts. They consist of an object that repeats the same motion over and over again, an oscillator, with a precisely constant interval between each repetition, or 'beat'. Attached to the oscillator is a controller device, which sustains the oscillator's motion by replacing the energy it loses to friction, and converts its oscillations into a series of pulses. The pulses are then added up in a chain of some type of counters to express the time in convenient units, usually seconds, minutes, hours, etc. Then finally some kind of indicator displays the result in a human-readable form.
Power sourceThis provides power to keep the clock going.
- In mechanical clocks, this is either a weight on a cord suspended from a pulley, or a mainspring.
- In electric clocks, it is either a battery or the AC power line.
OscillatorThe timekeeping element in every modern clock is a harmonic oscillator, a physical object (resonator) that vibrates or oscillates repetitively at a precisely constant frequency.
- In mechanical clocks, this is either a pendulum or a balance wheel.
- In some early electronic clocks and watches such as the Accutron, it is a tuning fork.
- In quartz clocks and watches, it is a quartz crystal.
- In atomic clocks, it is the vibration of electrons in atoms as they emit microwaves.
- In early mechanical clocks before 1657, it was a crude balance wheel or foliot which was not a harmonic oscillator because it lacked a balance spring. They were very inaccurate.
Some clocks rely for their accuracy on an external oscillator; that is, they are automatically synchronized to a more accurate clock:
- Slave clocks, used in large institutions and schools from the 1860s to the 1970s, kept time with a pendulum, but were wired to a master clock in the building, and periodically received a signal to synchronize them with the master, often on the hour.
- Synchronous electric clocks don't have an internal oscillator, but rely on the 50 or 60 Hz oscillation of the AC power line, which is synchronized by the utility to a precision oscillator. This drives a synchronous motor in the clock which rotates once for every cycle of the line voltage, and drives the gear train.
- Computer real time clocks keep time with a quartz crystal, but are periodically (usually weekly) synchronized over the internet to atomic clocks (UTC), using a system called Network Time Protocol.
- Radio clocks keep time with a quartz crystal, but are periodically (often daily) synchronized to atomic clocks (UTC) with time signals from government radio stations like WWV, WWVB, CHU, DCF77 and the GPS system.
ControllerThis has the dual function of keeping the oscillator running by replacing the energy lost to friction, and converting its vibrations into a series of pulses that serve to measure the time.
- In mechanical clocks, this is the escapement, which gives precise pushes to the swinging pendulum or balance wheel, and allows the clock's wheels to move forward by a set amount at each swing.
- In electronic clocks this is an electronic oscillator circuit that generates a series of electrical pulses, one for each vibration of the oscillator, often called the clock signal.
- In atomic clocks the controller is an evacuated microwave cavity attached to a microwave oscillator controlled by a microprocessor. A thin gas of cesium atoms is released into the cavity where they are exposed to microwaves. A laser measures how many atoms have absorbed the microwaves, and an electronic feedback control system called a phase locked loop tunes the microwave oscillator until it is at the exact frequency that causes the atoms to vibrate and absorb the microwaves. Then the microwave signal is divided by digital counters to become the clock signal.
Counter chainThis counts the pulses and adds them up to get traditional time units of seconds, minutes, hours, etc. It usually has a provision for setting the clock by manually entering the correct time into the counter.
- In mechanical clocks this is done analogically by a gear train, also called wheel train. The gear train also has a second function; to transmit mechanical power from the power source to run the oscillator. There is a friction coupling called the 'cannon pinion' which allows the gears driving the hands to be turned by a knob on the back, to set the time.
- In digital clocks a series of integrated circuit counters or dividers add the pulses up digitally, using binary logic. Often pushbuttons on the case allow the hour and minute counters to be incremented and decremented to set the time.
IndicatorThis displays the count of seconds, minutes, hours, etc. in a human readable form.
- The earliest mechanical clocks in the 13th century didn't have a visual indicator and signalled the time audibly by striking bells. Many clocks to this day are striking clocks which chime the hours.
- Analog clocks, including almost all mechanical and some electronic clocks, have a traditional dial or clock face, that displays the time in analog form with moving hour and minute hand.
- Digital clocks display the time in periodically changing digits on a digital display.
- Talking clocks and the speaking clock services provided by telephone companies speak the time audibly, using either recorded or digitally synthesized voices.
TypesClocks can be classified by the type of time display, as well as by the method of timekeeping.
Time display methods
Analogue clocks usually indicate time using angles. The most common clock face uses a fixed numbered dial or dials and moving hand or hands. It usually has a circular scale of 12 hours, which can also serve as a scale of 60 minutes, and 60 seconds if the clock has a second hand. Many other styles and designs have been used throughout the years, including dials divided into 6, 8, 10, and 24 hours. The only other widely used clock face today is the 24 hour analogue dial, because of the use of 24 hour time in military organizations and timetables. The 10-hour clock was briefly popular during the French Revolution, when the metric system was applied to time measurement, and an Italian 6 hour clock was developed in the 18th century, presumably to save power (a clock or watch chiming 24 times uses more power).
Another type of analogue clock is the sundial, which tracks the sun continuously, registering the time by the shadow position of its gnomon. Sundials use some or part of the 24 hour analogue dial. There also exist clocks which use a digital display despite having an analogue mechanism—these are commonly referred to as flip clocks.
Alternative systems have been proposed. For example, the TWELV clock indicates the current hour using one of twelve colors, and indicates the minute by showing a proportion of a circular disk, similar to a moon phase.
The mechanics of analogue clocks were also the subject of the Grammy Award winning Coldplay single, Clocks in which the continual ticking of the clocks mesmerises and fascinates the narrator of the song.
Digital clocks display a numeric representation of time. Two numeric display formats are commonly used on digital clocks:
Most digital clocks use an LCD, LED, or VFD display; many other display technologies are used as well (cathode ray tubes, nixie tubes, etc.). After a reset, battery change or power failure, digital clocks without a backup battery or capacitor either start counting from 00:00, or stay at 00:00, often with blinking digits indicating that time needs to be set. Some newer clocks will actually reset themselves based on radio or Internet time servers that are tuned to national atomic clocks. Since the release of digital clocks in the mainstream, the use of analogue clocks has dropped dramatically.
Auditory clocksFor convenience, distance, telephony or blindness, auditory clocks present the time as sounds. The sound is either spoken natural language, (e.g. "The time is twelve thirty-five"), or as auditory codes (e.g. number of sequential bell rings on the hour represents the number of the hour like the clock Big Ben). Most telecommunication companies also provide a Speaking clock service as well.
PurposesClocks are in homes, offices and many other places; smaller ones (watches) are carried on the wrist; larger ones are in public places, e.g. a train station or church. A small clock is often shown in a corner of computer displays, mobile phones and many MP3 players.
The purpose of a clock is not always to display the time. It may also be used to control a device according to time, e.g. an alarm clock, a VCR, or a time bomb (see: counter). However, in this context, it is more appropriate to refer to it as a timer or trigger mechanism rather than strictly as a clock.
Computers depend on an accurate internal clock signal to allow synchronized processing. (A few research projects are developing CPUs based on asynchronous circuits.) Some computers also maintain time and date for all manner of operations whether these be for alarms, event initiation, or just to display the time of day. The internal computer clock is generally kept running by a small battery. Many computers will still function even if the internal clock battery is dead, but the computer clock will need to be reset each time the computer is restarted, since once power is lost, time is also lost.
Ideal clocksAn ideal clock is a scientific principle that measures the ratio of the duration of natural processes, and thus will give the time measure for use in physical theories. Therefore, to define an ideal clock in terms of any physical theory would be circular. An ideal clock is more appropriately defined in relationship to the set of all physical processes. An ideal clock should too measure time in consistent, for example decimalized time units.
This leads to the following definitions:
The recurrent, periodic process (e.g. a metronome) is an oscillator and typically generates a clock signal. Sometimes that signal alone is (confusingly) called "the clock", but sometimes "the clock" includes the counter, its indicator, and everything else supporting it.
This definition can be further improved by the consideration of successive levels of smaller and smaller error tolerances. While not all physical processes can be surveyed, the definition should be based on the set of physical processes which includes all individual physical processes which are proposed for consideration. Since atoms are so numerous and since, within current measurement tolerances they all beat in a manner such that if one is chosen as periodic then the others are all deemed to be periodic also, it follows that atomic clocks represent ideal clocks to within present measurement tolerances and in relation to all presently known physical processes. However, they are not so designated by fiat. Rather, they are designated as the current ideal clock because they are currently the best instantiation of the definition.
NavigationNavigation by ships depends on the ability to measure latitude and longitude. Latitude is fairly easy to determine through celestial navigation, but the measurement of longitude requires accurate measurement of time. This need was a major motivation for the development of accurate mechanical clocks. John Harrison created the first highly accurate marine chronometer in the mid-18th century. The Noon gun in Cape Town still fires an accurate signal to allow ships to check their chronometers.
Use of a common clock in radio signal producing satellites is fundamental to the operation of GPS (Global Positioning System) navigation devices.
SeismologyIn determining the location of an earthquake, the arrival time of several types of seismic wave at at least four dispersed observers is dependent upon each observer recording wave arrival times according to a common clock.
Specific types of clocks
- Alarm clock
- Flip clock
- Astronomical clock
- Atomic clock
- Balloon clock
- Binary clock
- Bracket clock
- Carriage clock
- Cartel clock
- Chiming clock
- Clock network
- Clock of the Long Now
- Clock tower
- Countdown clock
- Cuckoo clock
- Data clock for timescapes created with time-technology
- Digital clock
- Doll's head clock
- Electric clock
- Floral clock
- Game clock
- Japanese clock
- Lantern clock
- Lighthouse Clock
- Longcase (or "grandfather") clock
- Master clock
- Mantel clock
- Musical clock
- Paper clock
- Pedestal clock
- Sidereal clock
- Skeleton clock
- Slave clock
- Slave clocks
- Speaking clock
- Striking clock
- Talking clock
- Tall-case clock
- Tide clock
- Time ball
- Time clock
- Tower clock
- Torsion pendulum clock
- Wall clock
- Water clock
- World clock
- Allan variance
- American Watchmakers-Clockmakers Institute
- Biological clock
- Clock as herald of the Industrial Revolution (Lewis Mumford)
- Clock face
- Clock of the Long Now
- Clock signal (digital circuits)
- Colgate Clock (New Jersey), the world's largest clock
- Cox's timepiece
- Death Clock
- Department of Defense master clock (U.S.)
- Doomsday Clock
- Earth clock
- Federation of the Swiss Watch Industry FH
- Guard tour patrol system (Watchclocks)
- Iron Ring Clock
- Jens Olsen's World Clock
- Mechanism (horology)
- National Association of Watch and Clock Collectors
- Star clock
- Steam clock
- System time
- Timeline of time measurement technology
- Time to digital converter
- Replica watch
- Jewel bearing
- Baillie, G.H., O. Clutton, & C.A. Ilbert. Britten’s Old Clocks and Watches and Their Makers (7th ed.). Bonanza Books (1956).
- Bolter, David J. Turing's Man: Western Culture in the Computer Age. The University of North Carolina Press, Chapel Hill, N.C. (1984). ISBN 0-8078-4108-0 pbk. Very good, readable summary of the role of "the clock" in its setting the direction of philosophic movement for the "Western World". Cf. picture on p. 25 showing the verge and foliot. Bolton derived the picture from Macey, p. 20.
- Bruton, Eric. The History of Clocks and Watches. London: Black Cat (1993).
- History of the Hour: Clocks and Modern Temporal Orders
- Edey, Winthrop. French Clocks. New York: Walker & Co. (1967).
- Kumar, Narendra "Science in Ancient India" (2004). ISBN 8126120568.
- Kak, Subhash, Ph.D. Babylonian and Indian Astronomy: Early Connections. February 17, 2003.
- Landes, David S. Revolution in Time: Clocks and the Making of the Modern World. Cambridge: Harvard University Press (1983).
- Lloyd, Alan H. “Mechanical Timekeepers”, A History of Technology, Vol. III. Edited by Charles Joseph Singer et al. Oxford: Clarendon Press (1957), pp. 648-675.
- Macey, Samuel L., Clocks and the Cosmos: Time in Western Life and Thought, Archon Books, Hamden, Conn. (1980).
- Science & Civilisation in China, Vol. 4, Part 2: Mechanical Engineering
- North, John. God's Clockmaker: Richard of Wallingford and the Invention of Time. London: Hambledon and London (2005).
- Palmer, Brooks. The Book of American Clocks, The Macmillan Co. (1979).
- Robinson, Tom. The Longcase Clock. Suffolk, England: Antique Collector’s Club (1981).
- Smith, Alan. The International Dictionary of Clocks. London: Chancellor Press (1996).
- Tardy. French Clocks the World Over. Part I and II. Translated with the assistance of Alexander Ballantyne. Paris: Tardy (1981).
- Yoder, Joella Gerstmeyer. Unrolling Time: Christiaan Huygens and the Mathematization of Nature. New York: Cambridge University Press (1988).
- Zea, Philip, & Robert Cheney. Clock Making in New England – 1725-1825. Old Sturbridge Village (1992).
- Science Museum - Time Measurement
- Article, by a key figure in the development of quartz crystal clocks, on the history of timekeeping up to the late 1940s from The Bell System Technical Journal, Vol. XXVII, pp. 510-588, 1948
- Information on Dutch clocks
- Tyranny of the Clock - Brief analysis and history of the clock within the context of the industrial revolution
timepiece in Arabic: ساعة (آلة)
timepiece in Azerbaijani: Saat
timepiece in Bulgarian: Часовник
timepiece in Catalan: Rellotge
timepiece in Chuvash: Сехет
timepiece in Czech: Hodiny
timepiece in Danish: Ur (kronometer)
timepiece in German: Uhr
timepiece in Modern Greek (1453-): Ρολόι
timepiece in Spanish: Reloj
timepiece in Esperanto: Horloĝo
timepiece in Basque: Erloju
timepiece in French: Horloge
timepiece in Galician: Reloxo
timepiece in Korean: 시계
timepiece in Icelandic: Klukka
timepiece in Italian: Orologio
timepiece in Hebrew: שעון
timepiece in Georgian: საათი
timepiece in Latin: Horologium
timepiece in Latvian: Pulkstenis
timepiece in Lithuanian: Laikrodis
timepiece in Hungarian: Óra (eszköz)
timepiece in Malay (macrolanguage): Jam (waktu)
timepiece in Dutch: Klok (tijd)
timepiece in Japanese: 時計
timepiece in Norwegian: Klokke
timepiece in Norwegian Nynorsk: Klokke
timepiece in Uzbek: Soat (asbob)
timepiece in Low German: Klock (Tiet)
timepiece in Polish: Zegar (czasomierz)
timepiece in Portuguese: Relógio
timepiece in Romanian: Ceas
timepiece in Russian: Часы
timepiece in Albanian: Ora
timepiece in Sicilian: Rologgiu
timepiece in Simple English: Clock
timepiece in Slovak: Hodiny
timepiece in Slovenian: Ura (naprava)
timepiece in Serbian: Сат (предмет)
timepiece in Finnish: Kello
timepiece in Swedish: Ur
timepiece in Thai: นาฬิกา
timepiece in Vietnamese: Đồng hồ
timepiece in Turkish: Saat (alet)
timepiece in Ukrainian: Годинник
timepiece in Yiddish: זייגער
timepiece in Contenese: 鐘
timepiece in Dimli: Saete (hacete)
timepiece in Chinese: 時鐘
Big Ben, alarm clock, alarm watch, astronomical clock, atomic clock, box chronometer, calendar clock, calendar watch, chronograph, chronometer, chronopher, chronoscope, clepsydra, clock, clock movement, clocks, clockworks, cuckoo clock, dial, digital clock, digital watch, electric clock, electronic clock, gnomon, grandfather clock, half-hour glass, half-minute glass, horologe, horologium, hourglass, hunter, independent-seconds watch, isochronon, journeyman, marine chronometer, metronome, repeater, sandglass, sundial, telltale, ticker, time switch, timekeeper, timepieces, timer, turnip, watch, watchworks, wristwatch